How to Size Youth Softball Batting Gloves at Home
Last Updated: October 29, 2026
Quick Summary
To size youth softball batting gloves at home, measure your child's bare dominant hand twice: hand length from the palm crease to the middle fingertip, and circumference across the knuckles. Match both numbers to a brand's size chart, then confirm the fit with a few simple checks.
Measure the bare hand in inches with the hand flat and relaxed, not over an existing glove.
Measure from the palm crease at the wrist to the middle fingertip, keeping the tape straight.
Wrap the tape snugly around the widest part of the hand just below the knuckles.
If the two measurements point to different sizes, size to the larger measurement.
Confirm the fit with checks for fingertip gap, palm flatness, knuckle room, wrist closure, and a swing test.
Table of Contents
What You Need Before You Measure
Getting the right fit for youth softball batting gloves starts with a few simple tools.
You will need:
A flexible cloth measuring tape, or a sheet of paper and a ruler
A pen to mark your numbers
Your child's dominant hand (the one they swing with, usually the right for most players)
A cloth tape works best because it wraps around the hand the way a glove would. A stiff ruler can work too, but it takes more care to keep it straight.
Have your child sit with the hand flat and relaxed. A hand that is clenched or spread wide will give a false reading.
How to Measure Hand for Batting Gloves at Home
Batting glove sizing comes down to two numbers: hand length and hand circumference. Both measurements matter, and most fit problems happen when only one is taken. Measure both, write them down, and then compare them against a size chart.

Measuring Hand Length from the Base of the Palm to the Middle Finger Tip
Place your child's hand palm-up on the table with the fingers together. Start the tape at the crease where the palm meets the wrist.
Record the number in inches. Keep the tape straight, not curved over the fingers, or the reading will come out too long.
A common mistake is measuring from the wrist bone instead of the palm crease.
Measuring Hand Circumference Across the Knuckles
Next, wrap the tape around the widest part of the hand, just below the knuckles and across the palm.
Pull the tape snug but not tight. It should sit flat against the skin with no gaps. Write down the number in inches.
Measure once more to confirm. If the two readings differ by more than a quarter inch, measure a third time.
Youth Batting Glove Size Chart: Matching Your Numbers to a Size
Once you have both numbers, the next step is converting them into a size. Most youth batting glove charts use letter sizes, Youth Small (YS), Youth Medium (YM), and Youth Large (YL), and each row lists a hand length range and a hand circumference range in inches.
A typical youth chart looks like this (always confirm against the specific brand's chart before ordering):
Size | Hand Length (in) | Hand Circumference (in) |
Youth Small (YS) | 5 1/2 - 5 7/8 | 5 1/2 - 6 |
Youth Medium (YM) | 5 7/8 - 6 1/4 | 6 - 6 1/2 |
Youth Large (YL) | 6 1/4 - 6 5/8 | 6 1/2 - 7 |
These ranges are representative, not universal. Brands shift their breakpoints by an eighth to a quarter inch, which is why the same child can land in YM for one maker and YL for another.
Converting Your Two Numbers to One Size
Use this order of operations:
Match length first. Find the row where your child's hand length falls.
Check circumference against the same row. If it also falls inside that row's range, you have your size.
If the two measurements point to different rows, size to the larger measurement. A glove that is slightly roomy at the fingertips is easier to play in than one that pinches across the knuckles.
If you are within 1/8 inch of a breakpoint, treat it as between sizes and read the next section.
Between-Size Results
Landing between sizes is common for growing players. A few practical rules:
Round up for a first pair if your child is mid-season in a growth spurt or you want the glove to last through the season.
Round down if your child is a contact hitter who wants a tight, controlled feel and the smaller size still passes the fit checks below.
Never round up more than one size. Jumping two sizes creates fingertip gaps that slide on the bat and reduce grip.
Youth vs. Adult Ranges
Youth charts generally top out around a 6 5/8-inch hand length and a 7-inch circumference. Adult Small typically starts near 6 3/4 inches in length and 7 inches in circumference. If your child measures at or above the top of the youth range, check the adult small chart, many brands overlap the two, and an adult small sometimes fits a larger youth hand better than a youth large.
Softball vs. Baseball Charts
Batting glove sizing is based on the hand, not the sport, so many brands publish one chart for both baseball and softball batting gloves. The sport matters for fielding gloves, not batting gloves. Do not size a batting glove from a softball fielding-glove chart, those use a completely different scale (11-inch, 12-inch, etc.) that refers to the glove's overall length, not the hand.
Pro Tip Write your child's two measurements on a note in your phone. When you shop a new brand, you only need to re-check that brand's chart, not re-measure the hand.
How Tight Should Batting Gloves Fit on a Youth Player
A batting glove should feel snug, like a second skin, but never painful. The fingers should reach the ends of the glove without bunching, and the palm should sit flat against the hand.
Use these quick checks once the glove is on:
Fingertips: There should be no more than a small gap at the tip of each finger
Palm: The leather should move smoothly with the hand, without wrinkling across the palm
Wrist strap: It should close without pulling the glove tight against the skin
A glove that is too loose will slide during swings and reduce grip. A glove that is too tight will restrict movement and wear out faster. Aim for the middle ground.
What to Do When Your Child Falls Between Batting Glove Sizes
Many young players land between two sizes. This is normal, especially for kids who are growing quickly. Here is how we suggest deciding:
Choose the larger size if your child plays mostly in cooler weather, since leather gloves stiffen slightly at first
Choose the smaller size if your child wants a close, controlled feel for contact hitting
Consider how long the season runs. A slightly big glove can last longer as hands grow over the year.
If you are still unsure, check the wrist strap length and finger fit after trying the glove on. Fit checks make the final call easier.
Reconciling Different Brand Sizing Methods and Checking Fit at Home
Glove makers do not all measure the same way. Some brands publish only hand circumference, others use both length and circumference, and breakpoints can be rounded up or down. This is where most sizing confusion starts, and where a five-minute at-home fit check saves a return.
Reconciling Brand Charts
Measure once, record both numbers. Hand length and hand circumference, in inches, written down.
Read which measurement the brand's chart uses. If it lists only circumference, that number drives the decision; use length as a sanity check.
When two brands disagree, go with the size that fits the larger of your two measurements. This prevents a glove that is correct in length but tight across the knuckles.
Check the brand's return policy before ordering if you are between sizes. A try-on pair from a local retailer in the same brand is the fastest way to confirm before a custom order.
The At-Home Fit Check
Put the glove on the dominant hand and run these five checks in order:
Fingertip gap. Pinch the tip of each finger through the glove. You want no more than about 1/8 to 1/4 inch of empty space at the end. More than that and the glove will slide on the bat.
Palm flatness. Press the palm of the gloved hand against the table. The leather should sit flat with no ridge or wrinkle across the palm. A wrinkle means the glove is too long in the hand.
Knuckle room. Make a loose fist. The leather across the back of the hand should flex without pulling tight or bunching.
Watch Out Do not measure over an existing batting glove or a winter glove. Measure the bare hand. Measuring over a glove adds roughly 1/8 inch in every direction and will push you up a size.
Troubleshooting Inconsistent Readings
Two readings differ by more than 1/4 inch. Re-measure a third time with the hand flat and relaxed. A clenched or spread hand gives a false reading.
Dominant and non-dominant hands measure differently. This is normal, most people have a slightly larger dominant hand. Size to the dominant hand, since that is the hand that grips the bat.
Your child is right at a breakpoint. Treat it as between sizes and use the rounding rules in the size-chart section above.
Softball-Specific Fit Note
If your child is between sizes and plays softball, the smaller size is often the better starting point, provided it passes the five fit checks above.
Key Takeaway A chart gets you to the right size range; the five-check fit test confirms it. If the glove passes all five, you have the right size even if the chart suggested the neighboring one.
Order Your Youth Softball Batting Gloves from Hometown Team Sports
Once you have your numbers and your size, you are ready to order. Hometown Team Sports offers customizable batting gloves with 42 leather color options and unlimited fabric color choices, along with lightweight Sereno fabric and full leather construction.
Order online today and bring your child's new gloves to the next practice. Use the batting glove order form to place your order with your measured size.
Frequently Asked Questions
How do you size batting gloves for kids?
Measure your child's hand length from the base of the palm to the tip of the middle finger, and measure hand circumference around the knuckles, not including the thumb. Use a flexible tape measure in inches, then compare both numbers to the brand's youth batting glove size chart. If the two measurements point to different sizes, choose the size that matches hand length first, since glove length determines whether the fingers fit properly. Hometown Team Sports can help you check your measurements against current size options. Pricing depends on quantity, dates, and delivery, so visit the website or request a quote for current details.
Should youth softball batting gloves fit tight?
Youth softball batting gloves should fit snug across the palm and knuckles without restricting the hand. Your child should be able to make a full fist and open the hand comfortably. The fingers should reach the end of the glove's finger stalls, with only a small amount of room, roughly a few millimeters, past the fingertips. A glove that feels loose at the fingertips will bunch up during swings, while one that is too tight will cause fatigue and reduce grip control. Check the fit by having your child grip an imaginary bat and swing a few times.
Can you use a baseball batting glove size chart for softball?
Many youth batting glove size charts are shared between baseball and softball, but you should confirm the chart matches the specific glove you are buying. Some brands publish separate charts or note differences in wrist opening and glove length. Always compare your hand length and circumference in inches to the chart for that exact product line. If a chart does not list softball-specific guidance, use the hand measurements as the primary guide and check fit on the hand before wearing the gloves in a game.
How do you know if youth batting gloves are too big?
Youth batting gloves that are too big will show extra material past the fingertips, a loose palm that shifts when your child grips a bat, and a wrist opening that slides around. Have your child hold a bat and take a few practice swings. If the glove rotates on the hand or the fingers flop, the size is likely too large. Going up a size usually causes more problems than going down one, so a glove that fits slightly snug is often the better choice for growing players.





Comments